Strip loads in DeepEX can be defined with linearly varying magnitudes in both vertical and horizontal directions. Hence, complicated surcharge patterns can be simulated. Surcharge pressures are calculated by dividing the strip load into increments where an equivalent line load is considered. Then the line load solutions are employed and numerically integrated to give the total surcharge at the desired elevation. The software subdivides each strip load into 50 increments where it performs the integration of both horizontal and vertical loads. On surface loads, the vertical load is calculated from integration along x and not along the surface line.
DeepEX is the ultimate software program for design and analysis of Deep Excavations! Design any wall type and support system in the most efficient way!
Structural and Geotechnical Design
Modern Interactive Interface
Model Automatic Optimization
Export Reports and Sketches
Limit Equilibrium - Non-Linear -
Finite Element Analysis
DeepEX is the Ultimate software for design of deep excavations. It incorporates general limit equilibrium methods and non-linear analysis method with use of elastoplastic Wincler springs.
DeepEX does both structural and geotechnical analysis of any deep excavation wall and support system.
Additional, optional modules are available and can make your life easier!
